Know how to maintain and store the silent cooling fan?

No matter what kind of silent cooling fan has its lifespan, the performance and lifespan when in use are related to good maintenance and storage. Today, Yirongchuan Electronics provides you with some suggestions for maintaining and storing the silent cooling fan, hoping to help you maintain the cooling fan.

The silent cooling fan should keep the operating environment and the surface of the fan clean during operation, and the inlet and outlet should not be confused. We should store the cooling fan in a dry environment to prevent the motor from getting wet, and take precautions when storing the fan in the open air. In the process of storage and operation, to prevent the fan from bumping, so as not to damage the fan, it must be carried out under the condition that the fan is completely normal. At the same time, it is necessary to ensure that the capacity of the power supply facilities is sufficient and the voltage is stable. The power cord must be a dedicated cord and cannot be powered by a temporary cord for a long time.

During the use of the silent cooling fan, if it is found that the fan has abnormal noise, the motor heats up seriously, the casing is live, the switch is tripped, and the fan cannot be started, stop the inspection immediately. In order to ensure the safe operation of the silent cooling fan, a trial operation should be carried out for about 5 minutes after the maintenance to determine whether there is any abnormality, and then start the silent cooling fan.

The operating environment of the silent cooling fan is different, and the bearing of the cooling fan should be supplemented or replaced with grease after a period of use (the closed bearing of the motor does not need to be replaced with grease during its service life). In order to ensure that the silent cooling fan has good maintenance during use, it is necessary to ensure the number of times of oil filling each time, and do not run without oil. Only operates when the DC cooling fan is fully functional. At the same time, it is necessary to ensure that the capacity of the power supply facilities is sufficient and the voltage is stable. Operation without phase is strictly prohibited. The power cord must be a dedicated cord, and no temporary cord shall be used for power supply